Laser Engravable Rubber by the Roll

: From $66.00 to $539.00

Select Product Options to View Available Quantity Discounts

Laser Rubber Roll:

Quantity:

Email this page to a friend

This pre-vulcanized Laser Rubber is supplied in rolls measuring 8 inches wide x 3 ft., 6 ft., 15 ft., or 30 ft. long. Custom lengths available, call for a quote. Orange-red color. Engraves deeply and quickly so you may be able to increase your engraving velocity when using this material. Clean burning leaving a white ash residue. Good for general stamping applications or self-inking stamps with regular stamp inks. In production it has an odor that may be offensive to some people.

Material needs to be washed with detergent and water after engraving. Confirm that your laser equipment is suitable for engraving stamp dies. Check with your laser equipment manufacturer to determine compatability of equipment and software.

The suggestions in the table below are a good starting point as you begin test engraving this material. Use your laser’s software settings for “stamp” mode or “3D effects” mode. Adjust speed and power settings as needed. Use your machine’s air assist mode while engraving. Observe the following precautions:

• Laser engraving or cutting rubber can possibly ignite the material. Never leave the laser system running unattended for any reason.
• Laser engraving or cutting rubber can produce foul odors. You may need to particulate filter or odor filter your exhaust depending on your environment, installation location and local air quality control regulations.
• Laser engraving or cutting rubber can produce abrasive dust and smoke. You will need to clean your laser more frequently to reduce wear and tear and keep the optics clear.
• When vector cutting this material be sure to use a vented cutting table. Without a cutting table the likelihood of flame increases.
• After engraving, wash the material with detergent and water. Then rinse and towel dry.

Related Products

Laser Engravable Rubber & Polymer : From $16.30 to $26.00 Stamp Die Products for Laser Engraving!	Acrylic Clear Stamp Mounts : From $0.39 to $73.37 Virtually Any Size!
IDEAL/Trodat Self-Inking Stamps : From $5.01 to $14.61 The Most Popular Self-Inking Stamps Worldwide!	Art Stamp Wood Mount Strips : From $4.40 to $15.60 Beautifully Sanded Hardwood Mounts
Coverdex Wood Mount Strips : From $5.40 to $14.89 Traditional Style Stamp Mount Block	Art Stamp Wood Mounts, Pre-Cut : From $0.66 to $7.10 Pre-Cut to Virtually Any Size!
Plastic Rubber Stamp Handles : From $0.82 to $1.12 Low Cost Combined with Ergonomic Design	Wood Rubber Stamp Handles : From $1.88 to $4.30 Four Sizes and Two Colors for Every Application
E-Z Indexing Sheets : From $12.08 to $74.75 Print and Attach to Your Artstamp Wood or Acrylic Mounts	Indexing Ink : From $8.05 to $312.80 For Stamping on Top of the Mount
Self-Adhesive & Plain Sponge Cushion : From $9.80 to $34.00 For Mounting Stamp Dies to the Mount	Paper Based Phenolic : From $3.38 to $23.55 For use with Rotary Engraving Equipment
Rubber Cement : From $8.00 to $96.00 For Mounting Rubber Dies	Cutting Shears : $41.00 Ideal for cutting rubber or polymer dies.
Gray Cling Cushion & Static Cling Film : From $1.15 to $392.46 Stamp Dies Can be Mounted Almost Anywhere!	Laser Cuttable Oil Board Stencil Material : From $1.25 to $3.80 Use your laser to cut perfect stencils!