Shop by Category

Art Stamp Mounting & Indexing

Brother Stampcreator PRO

Brother Tapecreator PRO

Daters & Numbering Machines

Die Plate Band Stamps

Diemaking Services - Rubber/Polymer

Gift Certificate

Hand Stamp Mounts & Handles

Hot Foil Stamping

IDEAL/Trodat Self-Inking Stamps

IDEAL/Trodat Self-Inking Daters & Numberers 

PROFESSIONAL Self-Inking Stamps

Inks & Cleaners 

Laser & Rotary Engraved Stamps

Negative Production Supplies

Photopolymer Equipment

Photopolymer Supplies

Pocket & Special Mounts

Production MACHINES!  

Promotional Support Products

Ribbon Printer

Rubber Molding Supplies

Seals & Embossers

Shipping Supplies

Stamp Pads

Stamp Storage Devices

Vulcanizer Accessories

Mailing Lists

Jackson Marking Products BBB Business Review

Lemon Yellow Laser Rubber

: $14.80
Item Number: LR-LY

Quantity Discounts - Order a quantity of this item to receive the lower price

2 to 4$13.17
5 to 24$12.43
25 to 49$11.54
50 to 99$10.36
100 to 1000$9.47

NEW!!  Lemon Yellow Laser Rubber emits a pleasant lemon aroma while engraving and in washout.  Engraves easily and becomes a very durable stamp die.  8 1/4" x 11 3/4" (A4) sheets and is approx. .090" thick. Bright yellow color.  Recommended for general stamping applications or self-inking stamps with regular stamp inks.  Note our generous quantity discounts!

Speed, Power and Other Recommendations for Engraving & Trimming Stamp Printing Dies

These settings are a good starting point as you begin test engraving our materials. If unsure about how to implement any of these recommendations or precautions contact your equipment manufacturer for assistance.
• Use your laser’s software settings for “stamp” mode or “3D effects” mode. Use your machine’s air assist mode while engraving.
• HIGH power, SLOW speed. When engraving, 80% to 100% power is standard and head velocity can be anywhere from 2% to 20% depending on the wattage of your laser machine. When vector cutting, 60% to 100% power is standard and head velocity ranges from 1% to 5%. A range of 500PPI to 1000PPI is standard for both engraving and vector cutting.
• If the material has a rough and a smooth side, always engrave the smooth side.
• After engraving wash the material with detergent and water using a soft brush, then rinse and towel dry.

Always observe the following precautions:

• Laser engraving or cutting rubber or polymer can possibly ignite the material. Never leave the laser system running unattended for any reason.
• When vector cutting these materials be sure to use a vented cutting table. Without a cutting table the likelihood of flame increases.
• Laser engraving or cutting rubber or polymer can produce foul odors. You may need to particulate filter or odor filter your exhaust depending on your environment, installation location and local air quality control regulations.
• Laser engraving or cutting rubber or polymer can produce abrasive dust and smoke. You will need to keep the optics clear and clean your laser more frequently to reduce wear and tear.

Related Products

Acrylic Clear Stamp Mounts
: From $0.39 to $74.00
Acrylic Clear Stamp Mounts
Virtually Any Size!
Art Stamp Wood Mount Strips
: From $4.40 to $15.60
Art Stamp Wood Mount Strips
Beautifully Sanded Hardwood Mounts
Art Stamp Wood Mounts, Pre-Cut
: From $0.66 to $7.10
Art Stamp Wood Mounts, Pre-Cut
Pre-Cut to Virtually Any Size!
E-Z Indexing Sheets
: From $12.08 to $74.75
E-Z Indexing Sheets
Print and Attach to Your Artstamp Wood or Acrylic Mounts
Indexing Ink
: From $8.85 to $344.00
Indexing Ink
For Stamping on Top of the Mount
Self-Adhesive & Plain Sponge Cushion
: From $9.80 to $34.00
Self-Adhesive & Plain Sponge Cushion
For Mounting Stamp Dies to the Mount
Cutting Shears
: $48.00
Cutting Shears
Ideal for cutting rubber or polymer dies.
Gray Cling Cushion & Static Cling Film
: From $1.15 to $399.00
Gray Cling Cushion & Static Cling Film
Stamp Dies Can be Mounted Almost Anywhere!
Laser Stencil Materials
: From $1.95 to $5.70
Laser Stencil Materials
Use your laser to cut perfect stencils!
Magnetic Sheet Material
: From $5.50 to $18.20
Magnetic Sheet Material
Attach Your Stamp Die to any Metal Surface