Utilize your laser engraving equipment to burn a stamp die! Then mount that die on any of our stamp mounts or self-inkers. We have just the right material for the application.
Our pre-vulcanized Laser Rubber (above) is available in 8 1/2" x 11" sheets. Pinkish-red color. Burns cleanly leaving a white ash residue. Good for general stamping applications or self-inking stamps with regular stamp inks. This is our lowest cost material. In production it has an odor that may be offensive to some people.
Our Laser Polymer (above) is supplied in 8" x 12" sheets. Greenish-yellow color. Laser Polymer is not as odoriferous as Laser Rubber, which is particularly important in a retail location. Great for general stamping applications and self-inking stamps. The cost is higher, but the engraving speed is also faster making it very economical regarding burn time.
Buna-N Laser Rubber (above) is a black, synthetic material used to form stamp or printing dies that will be used with alcohol, acid or oil based inks. It is not necessary to use Buna-N Rubber for most stamp production -- only industrial use stamps require Buna-N.
