Raw Rubber for Vulcanizing in your Press

Gum Rubber


The fine quality of this brick red, .090"-.100" thick dense rubber stamp gum can be seen at a glance. This rubber has a minimum of clay fillers that can cause pungent odors in your shop or work area. Vulcanizes easily under steam, electric or "dry" heat. Pre-treated with Mica powder to minimize sticking to the mold. Supplied on film backing. Remove the film and use our Release Paper to prevent sticking to the upper platen of your press. Has a four to six month shelf life. This material makes clear, sharp art stamp or rubber stamp dies from matrix or paper based phenolic molds. Vulcanizes in about 8 minutes at 300 degrees F. Sold in 10" x 18" sheets or in 18" wide, 50 lb. rolls (approximately 50 10" x 18" sheets per roll).

Price: $4.95
Buy Product Online | Visit Store Home
   

  Related Products


  Release Paper - Keeps Rubber from Sticking to your Press
  Mica Powder - For Rubber Mold Release and Polymer De-tack
  Buna-N Synthetic Rubber - For Really Tough Stamping Applications!
  Matrix Materials - Long Lasting Molds for Rubber Stamp Dies


 Other Items from Rubber Molding Supplies

  Gum Rubber - Raw Rubber for Vulcanizing in your Press
  Precision Rubber Stamp Presses - The Vulcanizer of Choice among Stampmakers Worldwide
  Matrix Materials - Long Lasting Molds for Rubber Stamp Dies
  Buna-N Synthetic Rubber - For Really Tough Stamping Applications!
  Mica Powder - For Rubber Mold Release and Polymer De-tack
  Paper Based Phenolic - For use with Rotary Engraving Equipment
  Release Paper - Keeps Rubber from Sticking to your Press
  Silicone Spray Release Solution - Used When Molding Matrix Material from Master Plate

 

  Return To Rubber Stamp Supplies and Materials

 

 

e-commerce solutions
Shopping cart powered by MonsterCommerce ecommerce software.